Oil Pressure Switching Valve Installation


  1. INSTALL OIL PRESSURE SWITCHING VALVE ASSEMBLY

  2. ADD ENGINE OIL

  3. INSPECT FOR OIL LEAK

  4. INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

  5. INSTALL FRONT BUMPER LOWER COVER

Oil Pressure Switching Valve -- Installation



1. INSTALL OIL PRESSURE SWITCHING VALVE ASSEMBLY

  1. Apply a light coat of engine oil to the O-ring of the oil pressure switching valve.

  1. Install the oil pressure switching valve with the bolt.

    Torque:
    10 N*m{102 kgf*cm, 7 ft.*lbf}
    NOTICE:
    Make sure that the O-ring is not cracked or jammed when installing the valve.

  1. Connect the oil pressure switching valve connector.



2. ADD ENGINE OIL

  1. Add new engine oil.

    Standard Oil Grade:

    Oil Grade
    		Oil Viscosity (SAE)
    G-DLD1, API CF-4, CF or ACEA B1
    (You may also use API CE or CD)
    		- 5W-30
    - 10W-30
    - 15W-40
    - 20W-50

    Standard Capacity:

    Item
    		Specified Condition
    Drain and refill without oil filter change
    		6.7 liters (7.1 US qts, 5.9 Imp. qts)
    Drain and refill with oil filter change
    		7.0 liters (7.4 US qts, 6.2 Imp. qts)
    Dry fill
    		7.5 liters (7.9 US qts, 6.6 Imp. qts)

  1. Install the oil filler cap.



3. INSPECT FOR OIL LEAK

  1. Start the engine. Make sure that there are no oil leaks from the areas that were worked on.



4. INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

  1. Install the No. 1 engine under cover with the 4 bolts.

    Torque:
    29 N*m{296 kgf*cm, 21 ft.*lbf}


5. INSTALL FRONT BUMPER LOWER COVER

  1. Install the lower front bumper cover with the clip and 5 bolts.

    Torque:
    8.0 N*m{82 kgf*cm, 71 in.*lbf}