Differential Pressure Sensor Installation


  1. INSTALL DIFFERENTIAL PRESSURE SENSOR

  2. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY

Differential Pressure Sensor -- Installation



1. INSTALL DIFFERENTIAL PRESSURE SENSOR


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.1Gd-Ftv Emission Control.Emission Control System.Differential Pressure Sensor Installation

  1. Install the 2 air hoses to the differential pressure sensor, and slide the 2 clamps to secure the 2 hoses.

    HINT:
    Make sure the paint mark of the air hose side the differential pressure sensor.
    Text in Illustration
    *a
    		Paint Mark

  1. Connect the 2 air hoses to the No. 1 vacuum pipe and No. 2 vacuum pipe, and slide the 2 clamps to secure the 2 hoses.

  1. Install the differential pressure sensor to the pipe clamp with the bolt.

    Torque:
    10 N*m{102 kgf*cm, 7 ft.*lbf}

  1. Connect the connector to the differential pressure sensor.



2. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. While pushing the No. 1 engine cover sub-assembly towards the rear, attach the 2 rear pins.

  1. Attach the 2 front clips to install the No. 1 engine cover sub-assembly.