Exhaust Gas Temperature Sensor (For Rear) Installation

Using a 14 mm union nut wrench, install the No. 4 exhaust gas temperature sensor to the center exhaust pipe assembly.

Torque:

Specified tightening torque

30 N*m {306 kgf*cm, 22 ft.*lbf}

NOTICE:

If the No. 4 exhaust gas temperature sensor is dropped, replace the new one.

HINT:

1. Calculate the torque wrench reading when changing the fulcrum length of the torque wrench (LandCruiser RM000003YMD00TX.html).
   
2. When using a union nut wrench (fulcrum length of 25 mm (0.984 in.)) + torque wrench (fulcrum length of 180 mm (7.09 in.)): 26 N*m (268 kgf*cm, 19 ft.*lbf)
   

Attach the 2 clamps and connect the No. 4 exhaust gas temperature sensor to the sensor bracket.

Connect the connector to the No. 4 exhaust gas temperature sensor.