Exhaust Gas Temperature Sensor (For Front) Removal


  1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

  2. REMOVE EXHAUST GAS TEMPERATURE SENSOR

Exhaust Gas Temperature Sensor (For Front) -- Removal



1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Detach the 2 front clips of the No. 1 engine cover sub-assembly.

  1. While pulling the No. 1 engine cover sub-assembly towards the front, detach the 2 rear pins, and then remove the No. 1 engine cover sub-assembly.



2. REMOVE EXHAUST GAS TEMPERATURE SENSOR
CAUTION:
To prevent burns, do not touch the engine, exhaust manifold or other high temperature components while the engine is hot.


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Disconnect the 3 connectors from the 3 exhaust gas temperature sensors.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the nut and disconnect the No. 3 exhaust gas temperature sensor from the No. 1 vacuum pipe.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the bolt and open the clamp of the pipe clamp.

  1. Detach the 3 connectors from the pipe clamp.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Using a 14 mm union nut wrench, remove the exhaust gas temperature sensor from the exhaust manifold converter sub-assembly.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Using a 14 mm union nut wrench, remove the No. 2 exhaust gas temperature sensor from the exhaust manifold converter sub-assembly.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Using a 14 mm union nut wrench, remove the No. 3 exhaust gas temperature sensor from the exhaust manifold converter sub-assembly.