Egr Bypass Valve Switching Valve Installation


  1. INSTALL NO. 1 VACUUM SWITCHING VALVE ASSEMBLY

  2. INSTALL VACUUM CONTROL VALVE SET

  3. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY

Egr Bypass Valve Switching Valve -- Installation



1. INSTALL NO. 1 VACUUM SWITCHING VALVE ASSEMBLY

  1. Install the No. 1 vacuum switching valve assembly to the bracket with the screw.

    Torque:
    1.4 N*m{14 kgf*cm, 12 in.*lbf}

  1. Connect the vacuum hose to the No. 1 vacuum switching valve assembly.



2. INSTALL VACUUM CONTROL VALVE SET

  1. Install the vacuum control valve set to the intake manifold with the 2 bolts.

    Torque:
    10 N*m{102 kgf*cm, 7 ft.*lbf}

  1. Connect the 2 vacuum hoses to the No. 2 vacuum transmitting pipe sub-assembly and No. 2 EGR valve assembly.

  1. Connect the connector to the vacuum control valve set.

  1. Connect the engine wire bracket with the bolt.

    Torque:
    13 N*m{131 kgf*cm, 9 ft.*lbf}


3. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. While pushing the No. 1 engine cover sub-assembly towards the rear, attach the 2 rear pins.

  1. Attach the 2 front clips to install the No. 1 engine cover sub-assembly.