Fuel System On-Vehicle Inspection


  1. CHECK FOR FUEL LEAK

  2. CHECK FUEL FILTER WARNING LIGHT AND DRAIN WATER

Fuel System -- On-Vehicle Inspection



1. CHECK FOR FUEL LEAK

  1. Check that there are no fuel leaks anywhere in the fuel system after performing maintenance.

    HINT:
    When checking for fuel leaks, make sure that there is pressure in the fuel line.


2. CHECK FUEL FILTER WARNING LIGHT AND DRAIN WATER

  1. Check the fuel filter multi-information display.

    NOTICE:
    When the fuel system warning is displayed on the multi-information display, replace the fuel filter (LandCruiser RM0000014GD02TX.html) or drain the water in the fuel filter.


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Disconnect the level warning switch connector.

  1. Remove the 2 nuts and lift up the fuel filter.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Connect a hose to the fuel filter drain plug. Place the other end of the hose into a container under the fuel filter drain plug.

  1. Loosen the fuel filter drain plug to drain water.

  1. Tighten the fuel filter drain plug by hand.

    NOTICE:
    Do not use any tools in this procedure.

  1. Install the fuel filter with the 2 nuts.

    Torque:
    18 N*m{184 kgf*cm, 13 ft.*lbf}

  1. Connect the level warning switch connector.