Fuel Pump (For Single Tank Type) Inspection


  1. INSPECT FUEL PUMP

Fuel Pump (For Single Tank Type) -- Inspection



1. INSPECT FUEL PUMP

  1. Inspect the resistance of the fuel pump.

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      		Condition
      		Specified Condition
      1 - 2
      		20°C (68°F)
      		0.2 to 3.0 Ω
      If the result is not as specified, replace the fuel pump.


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.1Gr-Fe Fuel.Fuel System.Fuel Pump (For Single Tank Type) Inspection

  1. Inspect the operation of the fuel pump.

    1. Connect the positive (+) lead of the battery to terminal 1 of the connector and the negative (-) lead to terminal 2. Check that the fuel pump operates.

      Text in Illustration
      *a
      		Component without harness connected
      (Fuel Pump)
      If the result is not as specified, replace the fuel pump and fuel pump ECU.
      NOTICE:
      1. These tests must be performed within 10 seconds to prevent the coil from burning out.
      1. Keep the fuel pump as far away from the battery as possible.
      1. Always turn the voltage on and off on the battery side, not the fuel pump side.
      2. When the pump is locked and does not operate due to foreign matter being stuck, etc., replace the fuel pump ECU (LandCruiser RM0000045D4011X.html) together with the fuel pump, as the fuel pump ECU may be damaged electrically.