Drive Belt -- Installation |
| 1. INSTALL FAN AND GENERATOR V BELT |
Use the pulley set bolt of the tensioner to rotate the tensioner pulley clockwise, and then install the V belt.
Text in Illustration *1 Crankshaft Pulley *2 Fan Pulley *3 Generator *4 No. 2 Idler Pulley *5 No. 3 Idler Pulley *6 Cooler Compressor *7 Viscous Heater - - *a Type A *b Type C *c Type B *d Type D - NOTICE:
- Make sure that the V belt is set properly on each pulley.
Check that the indicator mark of the V-ribbed belt tensioner (LandCruiser RM00000147501OX.html).
| 2. INSTALL FRONT HEATER BRACKET (for Cold Area Specification Vehicles) |
Install the front heater bracket with the 2 bolts.
- Torque:
- 25 N*m{250 kgf*cm, 18 ft.*lbf}
| 3. INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY |
Install the No. 1 engine under cover with the 4 bolts.
- Torque:
- 29 N*m{296 kgf*cm, 21 ft.*lbf}
| 4. INSTALL FRONT BUMPER LOWER COVER |
Install the lower front bumper cover with the clip and 5 bolts.
- Torque:
- 8.0 N*m{82 kgf*cm, 71 in.*lbf}