Ecd System Freeze Frame Data

  1. DESCRIPTION

  1. LIST OF FREEZE FRAME DATA

Ecd System -- Freeze Frame Data



DESCRIPTION
  1. The ECM records vehicle and driving condition information as freeze frame data the moment a DTC is stored. When troubleshooting, freeze frame data can be helpful in determining whether the vehicle was moving or stationary, whether the air fuel ratio was lean or rich, as well as the other data recorded at the time of a malfunction.
    HINT:
    If it is impossible to duplicate the problem even though a DTC is stored, confirm the freeze frame data.

  1. Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.5L-E Engine Control.Ecd System.Ecd System  Freeze Frame Data
    The ECM records engine conditions in the form of freeze frame data every 0.5 seconds. Using the GTS, 5 separate sets of freeze frame data can be checked.
    1. 3 data sets from before the DTC was stored
    2. 1 data set from when the DTC was stored
    3. 1 data set from after the DTC was stored
    1. These data sets can be used to simulate the condition of the vehicle from around the time of the occurrence of the malfunction. The data may assist in identifying the cause of the malfunction, and in judging whether it was temporary or not.

LIST OF FREEZE FRAME DATA

Tester Display
Measurement Item
Diagnostic Note
Vehicle Speed
Vehicle speed
The speed indicated on the speedometer.
Engine Speed
Engine speed
-
MAP
Absolute pressure inside intake manifold
-
Coolant Temp
Engine coolant temperature
If -40°C (-40°F), the sensor circuit is open.
If 140°C (284°F) or higher, the sensor circuit is shorted.
Intake Air
Intake air temperature
If -40°C (-40°F), the sensor circuit is open.
If 140°C (284°F) or higher, the sensor circuit is shorted.
Engine Run Time
Accumulated engine running time
-
Battery Voltage
Battery voltage
-
Glow Indicator Supported
Glow indicator supported
-
Glow Indicator
Glow indicator
-
Accel Position
Accelerator pedal position
-
Accel Sens. No.1 Volt %
Absolute accelerator pedal position No. 1
-
Accel Sens. No.2 Volt %
Absolute accelerator pedal position No. 2
-
Diesel Throttle Learn Status
Diesel throttle learning status
-
Throttle Step Position
Throttle step position
-
Injection Volume
Injection volume
-
Inj. FB Vol. for Idle
Injection feedback value for idle speed control
-
Injection Timing
Injection timing
-
Fuel Temperature
Fuel temperature
-
Starter Signal
Starter signal
-
Stop Light Switch
Stop light switch
-
A/C Signal
Air conditioning signal
-
Throttle Open Switch
Throttle open switch status
-
Time after DTC Cleared
Cumulative time after DTC cleared
-
Distance from DTC Cleared
Accumulated distance after DTC cleared
-
Warmup Cycle Cleared DTC
Warmup cycles after DTC cleared
-
TC and TE1
TC and TE1 connection status
-
ACT VSV
A/C cut status
-