Air Fuel Ratio Sensor Installation


  1. INSTALL AIR FUEL RATIO SENSOR

  2. INSTALL NO. 1 FRONT FENDER APRON TO FRAME SEAL RH

Air Fuel Ratio Sensor -- Installation



1. INSTALL AIR FUEL RATIO SENSOR
HINT:
Perform "Inspection After Repairs" after replacing the air fuel ratio sensor.
  1. w/o Urea SCR System: (LandCruiser RM000000TIN08IX.html)
  2. w/ Urea SCR System: (LandCruiser RM000000TIN08HX.html)


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.1Gd-Ftv Engine Control.Ecd System.Air Fuel Ratio Sensor Installation

  1. Using SST, install the air fuel ratio sensor to the front exhaust pipe.

    SST
    09224-00011
    Torque:
    Specified tightening torque:
    44 N*m{449 kgf*cm, 32 ft.*lbf}
    Text in Illustration
    *a
    		Torque Wrench Fulcrum Length
    HINT:
    1. Calculate the torque wrench reading when changing the fulcrum length of the torque wrench (LandCruiser RM000003YMD00TX.html).
    2. When using SST (fulcrum length of 30 mm (1.18 in.)) + torque wrench (fulcrum length of 180 mm (7.09 in.)): 38 N*m (384 kgf*cm, 28 ft.*lbf)

  1. Connect the connector and 2 clamps.



2. INSTALL NO. 1 FRONT FENDER APRON TO FRAME SEAL RH

  1. Install the No. 1 front fender apron to frame seal RH with the 5 clips.