Diesel Throttle Body -- Installation |
| 1. INSTALL DIESEL THROTTLE BODY ASSEMBLY |
Install a new gasket and the diesel throttle body with the 2 bolts and 2 nuts.
- Torque:
- 20 N*m{204 kgf*cm, 15 ft.*lbf}
Connect the throttle position sensor connector.
| 2. INSTALL NO. 1 INTAKE PIPE |
Connect the No. 1 intake pipe with the air hose and install the 2 bolts.
- Torque:
- 20 N*m{204 kgf*cm, 15 ft.*lbf}
Tighten the 2 clamps of the No. 1 air hose.
- Torque:
- 6.5 N*m{66 kgf*cm, 58 in.*lbf}
Tighten the clamp of the intercooler air hose.
- Torque:
- 6.5 N*m{66 kgf*cm, 58 in.*lbf}
Connect the vacuum hose to the manifold absolute pressure sensor connector.
Connect the 3 connectors to the intake air temperature sensor, throttle control motor and manifold absolute pressure sensor.
Attach the 2 clamps.
| 3. CONNECT NO. 4 VACUUM TRANSMITTING PIPE SUB-ASSEMBLY |
Connect the No. 4 vacuum transmitting pipe with the bolt.
- Torque:
- 8.0 N*m{82 kgf*cm, 71 in.*lbf}
| 4. CONNECT INLET HEATER WATER HOSE |
Connect the inlet heater water hose with the bolt.
- Torque:
- 26 N*m{260 kgf*cm, 19 ft.*lbf}