Side Moulding (For Rear Side) -- Reassembly |
- HINT:
- Use the same procedure for the RH and LH sides.
- The procedure listed below is for the LH side.
| 1. INSTALL REAR NO. 1 WHEEL OPENING EXTENSION PAD |
- HINT:
- When installing the rear No. 1 wheel opening extension pad, heat the rear No. 1 wheel opening extension using a heat light.
- Standard:
Item Temperature Rear No. 1 Wheel Opening Extension 20 to 30°C (68 to 86°F)
- NOTICE:
- Do not heat the rear No. 1 wheel opening extension excessively.
Clean the rear No. 1 wheel opening extension surface.
Using a heat light, heat the rear No. 1 wheel opening extension surface.
Remove the double-sided tape from the rear No. 1 wheel opening extension.
Wipe off any tape adhesive residue with cleaner.
Install a new rear No. 1 wheel opening extension pad.
Remove the peeling paper from the face of a new rear No. 1 wheel opening extension pad.
- HINT:
- After removing the peeling paper, keep the exposed adhesive free from foreign matter.
Install the rear No. 1 wheel opening extension pad.
 |
| 2. INSTALL REAR NO. 1 WHEEL OPENING EXTENSION PAD |
- HINT:
- When installing the rear No. 1 wheel opening extension pad, heat the rear No. 2 wheel opening extension using a heat light.
- Standard:
Item Temperature Rear No. 2 Wheel Opening Extension 20 to 30°C (68 to 86°F)
- NOTICE:
- Do not heat the rear No. 2 wheel opening extension excessively.
Clean the rear No. 2 wheel opening extension surface.
Using a heat light, heat the rear No. 2 wheel opening extension surface.
Remove the double-sided tape from the rear No. 2 wheel opening extension.
Wipe off any tape adhesive residue with cleaner.
Install a new rear No. 1 wheel opening extension pad.
Remove the peeling paper from the face of a new rear No. 1 wheel opening extension pad.
- HINT:
- After removing the peeling paper, keep the exposed adhesive free from foreign matter.
Install the rear No. 1 wheel opening extension pad.
 |