Front Power Seat Motor Assembly (For Rear Lifter) -- Removal |
| 1. REMOVE FRONT SEAT ASSEMBLY |
Remove the front seat assembly (Toyota Fortuner RM000003NZX009X.html).
| 2. REMOVE RECLINING POWER SEAT SWITCH KNOB |
Apply protective tape around the cushion shield.
 |
Using a screwdriver, detach the 2 claws and remove the knob.
- HINT:
- Tape the screwdriver tip before use.
| 3. REMOVE SLIDE & VERTICAL POWER SEAT SWITCH KNOB |
Using a screwdriver, detach the 4 claws and remove the knob.
- HINT:
- Tape the screwdriver tip before use.
 |
| 4. REMOVE FRONT SEAT CUSHION SHIELD RH WITH FRONT INNER NO. 1 SEAT CUSHION SHIELD |
Remove the 2 screws.
 |
Remove the 3 screws.
 |
Detach the claw and guide.
Remove the cushion shield.
| 5. REMOVE FRONT POWER SEAT SWITCH |
Remove the 3 screws.
 |
Disconnect the connector and remove the switch.
| 6. REMOVE FRONT SEAT CUSHION INNER SHIELD RH |
Remove the screw.
 |
Pull the cushion inner shield to detach the claw and guide.
Pull the cushion inner shield to detach the claw and remove the cushion inner shield.
 |
| 7. REMOVE FRONT SEAT INNER BELT ASSEMBLY RH |
Remove the front seat (Toyota Fortuner RM000003NZX009X.html).
| 8. REMOVE SEAT CUSHION COVER WITH PAD |
Remove the hog rings.
 |
Detach the hooks and remove the seat cushion cover with pad.
| 9. REMOVE FRONT POWER SEAT MOTOR ASSEMBLY (for Rear Lifter) |
Detach the 2 wire harness clamps.
w/ Front Seat Side Airbag:
Detach the wire harness clamp.
 |
Detach the 4 clamps indicated by the arrows in the illustration and remove the seat cushion spring.
Remove the 4 bolts and seat cushion frame.
 |
Using a T40 "TORX" socket wrench, remove the 2 "TORX" bolts for the tilt rod.
 |
Remove the nut and tilt rod.
Disconnect the connector.
 |
Using a T40 "TORX" socket wrench, remove the "TORX" bolt for the adjust screw.
Using a 4 mm socket hexagon wrench, remove the 2 bolts and motor.
- HINT:
- When the adjust screw is locked in the uppermost or lowermost position, turn the screw to release the lock before removing the motor unit.