Rear No. 1 Seat Assembly (For Rh Side) Disassembly

Remove the screw.

Using a screwdriver, detach the 3 claws and remove the reclining cover.

HINT:

Tape the screwdriver tip before use.

Remove the screw and release handle.

Remove the screw.

Using a screwdriver, detach the 4 claws and remove the reclining cover.

HINT:

Tape the screwdriver tip before use.

Remove the 4 bolts and seatback.

Using a screwdriver, detach the hooks.

HINT:

Tape the screwdriver tip before use.

Open the zipper.

Roll up the seatback cover.

Remove the 2 bolts, 2 bushes and armrest.

Remove the 10 hog rings.

Detach the 4 claws and remove the 2 headrest supports.

Remove the seatback cover (with pad) from the seatback frame.

Remove the 2 hog rings and seatback cover from the seatback pad.

Remove the nut and arm.

Remove the nut and arm.

Remove the bolt and seat belt.

Remove the screw and reclining remote control lever knob.

Remove the 7 screws.

Raise the lock cover and remove the rear seat lock control cable from the lock cover's claw. Then remove the lock cover.

Remove the 2 screws and lock cover.

Remove the 2 nuts and hinge.

Remove the 2 nuts and hinge.

Remove the seat track adjusting handle.

Remove the release handle from the rear seat lock through the hole in the rear seat cushion under cover.

Using a screwdriver, remove the support spring and disconnect the lock control cable as shown in the illustration.

HINT:

Tape the screwdriver tip before use.

Using a T40 "torx" socket, remove the 2 "torx" bolts, plate and lock.

Using a screwdriver, remove the support spring.

HINT:

Tape the screwdriver tip before use.

Disconnect the lock control cable from the seat track.

Using a T40 "torx" socket, remove the 2 "torx" bolts and lock (together with the lock control cable).

Remove the E-ring, plate and lock control cable from the lock.

Using a T40 "torx" socket, remove the 2 "torx" bolts and bracket.

Lift the seat track adjusting handle and move the seat track to the foremost position.

Using a T40 "torx" socket, remove the 4 "torx" bolts.

Lift the seat track adjusting handle and move the seat track to the rearmost position.

Using a screwdriver, push down the handle stopper and detach the claws. Then remove the seat track adjusting handle.

Using a T40 "torx" socket, remove the 2 "torx" bolts and seat cushion from the 2 seat tracks.

Using a screwdriver, detach the 11 claws and hooks.

HINT:

Tape the screwdriver tip before use.

Remove the under cover from the seat cushion cover. Then fold back the seat cushion cover so that the 4 screws are visible.

Remove the 4 screws.

Detach the 2 claws and remove the under cover.

Remove the bolt and seat belt center.

Remove the bolt and seat belt LH.

Remove the seat cushion cover (with pad) from the seat cushion frame.

Remove the 4 hog rings and seat cushion cover from the seat cushion pad.

Pull the band in the direction indicated by the black arrow in the illustration. Then remove the band.