Front Seat Assembly (W/ Front Seat Side Airbag) -- Removal |
- CAUTION:
- Wear protective gloves. Sharp areas on the parts may injure your hands.
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Toyota Fortuner RM000002HD2006X.html).
| 2. REMOVE INNER SEAT TRACK BRACKET COVER |
Lift up the seat track adjusting handle and move the seat to the foremost position.
Using a screwdriver, detach the 2 claws and remove the cover.
- HINT:
- Tape the screwdriver tip before use.
 |
| 3. REMOVE OUTER SEAT TRACK BRACKET COVER |
Using a screwdriver, detach the 2 claws and remove the cover.
- HINT:
- Tape the screwdriver tip before use.
 |
| 4. REMOVE FRONT SEAT HEADREST ASSEMBLY |
Remove the front seat headrest.
| 5. REMOVE FRONT SEAT ASSEMBLY |
Remove the 2 bolts.
 |
Lift up the seat track adjusting handle and move the seat to the rearmost position.
Remove the 2 bolts.
 |
Lift up the seat track adjusting handle and move the seat to the center position. Also, operate the reclining adjuster release handle and move the seatback to the upright position.
Disconnect the connectors under the seat.
- NOTICE:
- Be careful not to damage the airbag wire harness or connector.
Remove the seat from the vehicle.
- NOTICE:
- Be careful not to damage the vehicle body.