INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY (for Front LH, w/Regulator)
INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY (for Front RH, w/Regulator)
INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY (for Rear LH, w/Regulator)
INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY (for Rear RH, w/Regulator)
Power Window Regulator Motor -- Inspection |
- HINT:
- Use the same procedure for RHD and LHD vehicles.
- The procedure listed below is for LHD vehicles.
1. INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY (for Front LH, w/Regulator) |
![]() |
Apply battery voltage to connector terminals 1 and 2.
- NOTICE:
- Do not apply battery voltage to any terminals except terminals 1 and 2.
Check that the motor gear rotates smoothly as follows.
- OK:
Measurement Condition Specified Condition Battery positive (+) → 2
Battery negative (-) → 1Arm of window regulator rotates clockwise (Up) Battery positive (+) → 1
Battery negative (-) → 2Arm of window regulator rotates counterclockwise (Down)
- If the result is not as specified, replace the front door window regulator sub-assembly.
2. INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY (for Front RH, w/Regulator) |
![]() |
Apply battery voltage to connector terminals 1 and 2.
- NOTICE:
- Do not apply battery voltage to any terminals except terminals 1 and 2.
Check that the motor gear rotates smoothly as follows.
- OK:
Measurement Condition Specified Condition Battery positive (+) → 2
Battery negative (-) → 1Arm of window regulator rotates counterclockwise (Up) Battery positive (+) → 1
Battery negative (-) → 2Arm of window regulator rotates clockwise (Down)
- If the result is not as specified, replace the front door window regulator sub-assembly.
3. INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY (for Rear LH, w/Regulator) |
![]() |
Apply battery voltage to connector terminals 1 and 2.
Check that the motor gear rotates smoothly as follows.
- OK:
Measurement Condition Specified Condition Battery positive (+) → 2
Battery negative (-) → 1Arm of window regulator rotates clockwise (Up) Battery positive (+) → 2
Battery negative (-) → 1Arm of window regulator rotates counterclockwise (Down)
- If the result is not as specified, replace the rear door window regulator sub-assembly.
4. INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY (for Rear RH, w/Regulator) |
![]() |
Apply battery voltage to connector terminals 1 and 2.
Check that the motor gear rotates smoothly as follows.
- OK:
Measurement Condition Specified Condition Battery positive (+) → 2
Battery negative (-) → 1Arm of window regulator rotates counterclockwise (Up) Battery positive (+) → 1
Battery negative (-) → 2Arm of window regulator rotates clockwise (Down)
- If the result is not as specified, replace the rear door window regulator sub-assembly.