Front Door Speaker Installation

Install a nose piece to an air riveter or hand riveter. Then insert the mandrel part of a new φ4 mm waterproof rivet into the nose piece.

Using an air riveter or hand riveter, install the speaker with 3 new rivets.

NOTICE:

1. Do not pry the rivet with the riveter, as this will cause damage to the riveter and mandrel.
   

   Text in Illustration

   *1	Mandrel
   *2	Riveter
   *a	INCORRECT
   *b	CORRECT



2. Confirm that the rivets are seated properly against the speaker.
   

   Text in Illustration

   *1	Riveter
   *a	INCORRECT
   *b	CORRECT

3. Do not tilt the riveter when installing the rivet to the speaker.
   
4. Do not leave any space between the rivet head and speaker.
   


5. Do not leave any space between the speaker and door. Firmly hold together the 2 items while installing the rivet.
   

   Text in Illustration

   *1	Riveter
   *a	INCORRECT
   *b	CORRECT

Connect the connector.

Attach the 8 clips to install the front door trim board.

Install the screw and clip.

Connect the connector.

Attach the 4 claws and 2 clips to install the power window regulator switch assembly with front door armrest base panel.

Install the door pull handle with the screw.

Install the front No. 2 speaker assembly with the screw.

Connect the connector.

Attach the 2 clips to install the front door lower frame bracket garnish.