Radio Receiver Removal


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE HEATER CONTROL KNOB

  3. REMOVE FRE/REC CONTROL KNOB

  4. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY CENTER

  5. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET

Radio Receiver -- Removal



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.


2. REMOVE HEATER CONTROL KNOB


Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Audio Visual.Radio Receiver.Radio Receiver Removal

  1. Remove the 3 control knobs.



3. REMOVE FRE/REC CONTROL KNOB


Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Audio Visual.Radio Receiver.Radio Receiver Removal

  1. Remove the control knob.



4. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY CENTER


Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Audio Visual.Radio Receiver.Radio Receiver Removal
HINT:
To prevent the clips from falling, horizontally pull out the panel. Hold both sides of the panel in the locations indicated by the arrows in the illustration.

  1. Remove the screw <C>.

  1. Detach the 6 claws and 4 clips.

    NOTICE:
    Make sure the center registers are not removed.

  1. Disconnect all connectors and remove the panel.



5. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET


    Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50

  1. Remove the 4 screws.

  1. Disconnect all connectors and remove the radio receiver with bracket.



    Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50

  1. w/o Stereo opening cover:
    Remove the 4 screws and No. 1 radio bracket from the radio receiver.



    Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50

  1. w/o Stereo opening cover:
    Remove the 4 screws and No. 2 radio bracket from the radio receiver.