Meter / Gauge System -- System Description |
| METER GAUGE AND WARNING/INDICATOR LIGHT |
| Item | Signal Description |
| Speedometer | Calculates vehicle speed based on signal from vehicle speed sensor |
| Tachometer | Calculates engine speed based on signal from ECM |
| ODO/TRIP Meter | Calculates distance vehicle is driven or distance since trip meter knob is pressed |
| Fuel | Indicates remaining amount of fuel based on signal from fuel sender gauge |
| Engine Coolant Temperature | Indicates engine coolant temperature based on signal from ECM |
| Item | Signal Description |
| TURN | Blinks when receiving signal that turn signal switch or hazard warning signal switch is ON |
| BEAM | Illuminates when headlight dimmer switch is set to HI BEAM or FLASH position |
| CHARGE | Illuminates when receiving malfunction signal from generator |
| OIL PRESSURE | Illuminates when receiving "oil pressure is abnormally low (pressure switch is ON)" signal |
| MIL | Illuminates when receiving malfunction signal from ECM |
| DOOR | Illuminates when receiving each door courtesy light switch signal |
| DRIVER SEAT BELT | Blinks when driver's seat belt buckle switch is ON (unfastened) |
| PASSENGER SEAT BELT*1 | Blinks when passenger's seat belt buckle switch is ON (unfastened) |
| BRAKE | Illuminates when receiving signal that parking brake switch is ON, brake fluid warning switch is ON, or vacuum warning switch is ON |
| ABS | Illuminates when receiving malfunction signal from skid control ECU with actuator |
| GLOW*2 | Illuminates when receiving "engine is too cold to start (glow heater is ON)" signal from ECM |
| FUEL SYSTEM*2 | Illuminates when fuel filter is clogged and blinks when certain amount of water is accumulated at bottom of fuel filter |
| T-BELT*2 | Illuminates when odometer's display is 150,000 km |
| OIL LEVEL*2 | Illuminates when receiving "amount of engine oil is not sufficient" signal from engine oil level sensor |
| SRS | Illuminates when receiving malfunction signal from center airbag sensor assembly |
| FUEL | Illuminates when receiving fuel empty signal from fuel sender gauge |
| P*3 | Illuminates when receiving P signal from PNP switch |
| R*3 | Illuminates when receiving R signal from PNP switch |
| N*3 | Illuminates when receiving N signal from PNP switch |
| D*3 | Illuminates when receiving D signal from shift control ECU |
| 4*3 | Illuminates when receiving 4 signal from shift control ECU |
| 3*3 | Illuminates when receiving 3 signal from shift control ECU |
| 2*3 | Illuminates when receiving 2 signal from PNP switch |
| L*3 | Illuminates when receiving L signal from PNP switch |
| A/T P*4 | Illuminates when receiving "transfer shift lever is on N and A/T shift lever is on P" signal |
| ATF TEMP*4 | Illuminates when receiving "ATF temperature is too high" signal from ECM |
| FRONT FOG | Illuminates when front fog light switch is ON |
| CRUISE*5 | Illuminates when receiving "cruise control system is operating properly" signal from ECM |
| A/T OIL TEMP | Illuminates when receiving A/T oil temperature signal from ECM |
| CENTER DIFF. LOCK | Illuminates when receiving center differential lock signal from transfer indicator switch |
| REAR DIFF. LOCK*6 | Illuminates when receiving rear differential lock signal from 4WD control ECU |
- HINT:
- *1: w/ Seat belt warning light
- *2: 1KD-FTV
- *3: A/T
- *4: 4WD (A/T)
- *5: w/ Cruise control system
- *6: w/ Rear differential lock system
| Item | Signal Description |
| Light Reminder | Buzzer is ON when ignition switch is OFF, light control switch is set to TAIL or HEAD position, and driver side door is open |
| COMBINATION METER HAS FOLLOWING FEATURES |
Built-in buzzer for the light reminder system
- Warning buzzer sounds when the light control switch is set to the TAIL or HEAD position, the ignition switch is OFF and the driver side door is open.
- Warning buzzer sounds when the light control switch is set to the TAIL or HEAD position, the ignition switch is OFF and the driver side door is open.
Odometer and trip meter knob
- Press and release the knob to scroll through trip "A", trip "B" and odometer figures.
- Press and hold the knob to reset the trip meter.
- Press and release the knob to scroll through trip "A", trip "B" and odometer figures.
Accessory meter assembly (multi-display)
- The accessory meter (multi-display) provides the following information: 1) outside temperature; 2) average fuel consumption for a certain distance; 3) instantaneous fuel consumption; 4) average speed for a certain distance; 5) runnable distance with the remaining amount of fuel; 6) elapsed time since the ignition switch was turned ON; and 7) passenger seat belt unfastened warning by blinking the seat belt warning light.
- Press INFO to change the display item.
- Press RESET to clear the stored data.
- Press H to adjust the hour of the clock.
- Press M to adjust the minutes of the clock.
- Press 00 to set the minutes to 00.
- The accessory meter (multi-display) provides the following information: 1) outside temperature; 2) average fuel consumption for a certain distance; 3) instantaneous fuel consumption; 4) average speed for a certain distance; 5) runnable distance with the remaining amount of fuel; 6) elapsed time since the ignition switch was turned ON; and 7) passenger seat belt unfastened warning by blinking the seat belt warning light.