Front Wiper Motor And Link -- Removal |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
| 2. REMOVE FRONT WIPER ARM HEAD CAP |
Remove the 2 caps.
| 3. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH |
 |
Remove the nut and arm and blade.
| 4. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH |
 |
Remove the nut and arm and blade.
| 5. REMOVE HOOD TO COWL TOP SEAL |
 |
Detach the 9 clips and remove the seal.
| 6. REMOVE COWL TOP VENTILATOR LOUVER LH |
 |
Detach the 4 claws and remove the louver.
| 7. REMOVE COWL TOP VENTILATOR LOUVER RH |
 |
Detach the 5 claws and remove the louver.
| 8. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY |
 |
Disconnect the connector.
Remove the 2 bolts.
Move the wiper cushion in the direction shown by the arrow in the illustration to detach the wiper cushion from the body, and remove the wiper motor and link.
| 9. REMOVE WINDSHIELD WIPER MOTOR ASSEMBLY |
Using a screwdriver, disconnect the 2 rods of the wiper link from the wiper motor as shown in the illustration.
- HINT:
- Tape the screwdriver tip before use.
 |
Using a T30 ''torx'' socket, remove the 2 bolts and wiper motor.
 |