Back Door Courtesy Switch Removal


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE BACK DOOR TRIM BOARD ASSEMBLY

  3. REMOVE BACK DOOR LOCK ASSEMBLY

Back Door Courtesy Switch -- Removal



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.


2. REMOVE BACK DOOR TRIM BOARD ASSEMBLY

  1. Using a screwdriver, detach the 16 clips and remove the trim board.

    HINT:
    Tape the screwdriver tip before use.


3. REMOVE BACK DOOR LOCK ASSEMBLY

  1. w/ Power door lock:
    Disconnect the lock connector.

  1. Remove the 3 bolts and lock.

    HINT:
    Remove the lock through the service hole.
    NOTICE:
    Be careful when removing the bolts as the lock may fall and become damaged.