Fog Light Assembly Removal


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE RADIATOR GRILLE

  3. REMOVE FRONT FENDER LINER LH

  4. REMOVE FRONT BUMPER COVER

  5. REMOVE FOG LIGHT ASSEMBLY LH

Fog Light Assembly -- Removal


HINT:
  1. Use the same procedures for the RH and LH side.
  2. The procedures listed below are for the LH side.


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.


2. REMOVE RADIATOR GRILLE


    Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Lighting.Fog Light Assembly.Fog Light Assembly Removal

  1. Remove the 2 screws.

  1. Using a clip remover, remove the 2 clips.

  1. Pull the radiator grille in the direction indicated by the arrow in the illustration to detach the 6 claws and remove the radiator grille.



3. REMOVE FRONT FENDER LINER LH


    Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Lighting.Fog Light Assembly.Fog Light Assembly Removal

  1. Remove the screw.

  1. Using a clip remover, remove the 3 clips.

  1. Partially remove the fender liner.

    HINT:
    It is not necessary to fully remove the fender liner. Partially remove it so that the bumper cover can be removed in the next step.


4. REMOVE FRONT BUMPER COVER


Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50

  1. Using a clip remover, remove the 11 clips.



    Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Lighting.Fog Light Assembly.Fog Light Assembly Removal

  1. Put protective tape under the front fender.

  1. Detach the 8 claws and remove the cover.

  1. Disconnect the 2 fog light connectors.



5. REMOVE FOG LIGHT ASSEMBLY LH


Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50

  1. Disconnect the connectors.

  1. Remove the 3 bolts and fog light.