Cruise Control Main Switch Removal


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE STEERING PAD ASSEMBLY

  3. REMOVE STEERING WHEEL ASSEMBLY

  4. REMOVE CRUISE CONTROL MAIN SWITCH ASSEMBLY

Cruise Control Main Switch -- Removal


CAUTION:
Be sure to read the precautionary notices concerning the SRS airbag system before servicing it (Toyota Fortuner RM000000YVR005X.html).


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.


2. REMOVE STEERING PAD ASSEMBLY


Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50

  1. Straighten the front wheels.

  1. Using a T30 "torx" socket, loosen the 2 screws until the groove along each screw circumference catches on the screw case.



    Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50

  1. Pull out the steering pad from the steering wheel and support the steering pad with one hand as shown in the illustration.

    NOTICE:
    When removing the steering pad, do not pull the airbag wire harness.

  1. Using a screwdriver, disconnect the airbag connector.

    NOTICE:
    When handling the airbag connector, do not damage the airbag wire harness.

  1. Disconnect the horn connector and remove the steering pad.



3. REMOVE STEERING WHEEL ASSEMBLY

  1. Remove the steering wheel set nut.

  1. Place matchmarks on the steering wheel and main shaft.



    Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Cruise Control.Cruise Control Main Switch.Cruise Control Main Switch Removal

  1. Using SST, remove the steering wheel.

    SST
    09950-50013(09951-05010,09952-05010,09953-05020,09954-05021)


4. REMOVE CRUISE CONTROL MAIN SWITCH ASSEMBLY


Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50

  1. Remove the 3 screws and switch.