Cruise Control System Road Test

Inspect the SET function.

1. Turn the cruise control main switch on.
   

2. Drive at the required speed (40 km/h (25 mph) or more).
   

3. Push the cruise control main switch to -SET.
   

4. After releasing the switch, check that the vehicle cruises at the set speed.
   

Inspect the + (ACCELERATION) function.

1. Turn the cruise control main switch on.
   

2. Drive at the required speed (40 km/h (25 mph) or more).
   

3. Push the cruise control main switch to -SET.
   

4. Check that the vehicle speed increases while the cruise control main switch is pushed to +RES, and that the vehicle cruises at the newly set speed when the switch is released.
   

5. Momentarily (approximately 0.6 seconds) push the cruise control main switch to +RES and then immediately release it. Check that the vehicle speed increases by approximately 1.6 km/h (1.0 mph) (TAP-UP control).
   

Inspect the - (COAST) function.

1. Turn the cruise control main switch on.
   

2. Drive at the required speed (40 km/h (25 mph) or more).
   

3. Push the cruise control main switch to -SET.
   

4. Check that the vehicle speed decreases while the cruise control main switch is pushed to -SET, and that the vehicle cruises at the newly set speed when the switch is released.
   

5. Momentarily (approximately 0.6 seconds) push the cruise control main switch to -SET, and then immediately release it. Check that vehicle speed decreases by approximately 1.6 km/h (1.0 mph) (TAP-DOWN control).
   

Inspect the CANCEL function.

1. Turn the cruise control main switch on.
   

2. Drive at the required speed (40 km/h (25 mph) or more).
   

3. Push the cruise control main switch to -SET.
   

4. When performing one of the following, check that the cruise control system is canceled and that the normal driving mode is restored.
   

   1. Depressing the brake pedal.
      
   2. Shifting into any position except D or 3*1.
      
   3. Shifting into any position except D or 4*2.
      
   4. Turning the main switch off.
      
   5. Pulling the cruise control main switch to CANCEL.
      
   6. Depressing the clutch pedal*3.
      
   7. Driving the vehicle while the VSC system is operating*4.
      
   1. *1: for 1KD-FTV
      
   2. *2: for 1GR-FE
      
   3. *3: for Manual Transmission
      
   4. *4: w/ VSC
      

Inspect the RES (RESUME) function.

1. Turn the cruise control main switch on.
   

2. Drive at the required speed (40 km/h (25 mph) or more).
   

3. Push the cruise control main switch to -SET.
   

4. Cancel the cruise control system by performing one of the cruise control system cancel operations described above (other than turning the cruise control main switch off).
   

5. After pushing the cruise control main switch to +RES at a driving speed of more than 40 km/h (25 mph), check that the vehicle drives at the set speed.