Curtain Shield Airbag Assembly -- Installation |
- HINT:
- Use the same procedure for the RH and LH sides.
- The procedure listed below is for the LH side.
| 1. INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY LH |
Attach the 2 claws and temporarily install the 2 bolts in the order shown in the illustration (arrows 1 through 4).
Tighten the 2 bolts in the order shown in the illustration (arrows 1 through 2).
- Torque:
- 11 N*m{112 kgf*cm, 8 ft.*lbf}
- NOTICE:
- Do not twist the curtain shield airbag when installing it.
Attach the 7 claws and install the 7 bolts in the order shown in the illustration to install the curtain shield airbag assembly LH (arrows 3 through 16).
- Torque:
- 11 N*m{112 kgf*cm, 8 ft.*lbf}
- NOTICE:
- Do not twist the curtain shield airbag when installing it.
Connect the connector.
- NOTICE:
- When handling the airbag connector, take care not to damage the airbag wire harness.
 |
| 2. INSTALL ROOF HEADLINING ASSEMBLY |