Parking Brake Lever -- Removal |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
| 2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY |
 |
Twist the transmission shift lever knob in the direction indicated by the arrow and remove it.
for 4WD:
Twist the transfer shift lever knob in the direction indicated by the arrow and remove it.
| 3. REMOVE PARKING BRAKE HOLE COVER SUB-ASSEMBLY |
 |
Detach the 4 claws and remove the hole cover.
| 4. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY |
 |
- NOTICE:
- Be careful not to damage the instrument panel lower and console box with the claws of the upper console panel.
Detach the 12 claws and remove the console panel.
| 5. REMOVE CONSOLE BOX ASSEMBLY |
 |
Remove the 4 screws <F> and 2 bolts <E>.
Using a clip remover, remove the 2 clips and console box.
| 6. REMOVE PARKING BRAKE LEVER SUB-ASSEMBLY |
 |
Remove the lock nut and wire adjusting nut labeled A.
Remove the 2 bolts labeled B and lever (with the No. 1 parking brake cable).
Bend the claw labeled C so that the cable can be removed.
Remove the 2 bolts and 2 nuts labeled D.
Disconnect the cable from the lever.
Disconnect the parking brake switch connector.
Remove the screw and switch from the lever.