Brake Pedal (W/O Vsc) Removal


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE COMBINATION METER ASSEMBLY

  3. DISCONNECT BRAKE MASTER CYLINDER PUSH ROD CLEVIS

  4. REMOVE BRAKE PEDAL SUPPORT SUB-ASSEMBLY

Brake Pedal (W/O Vsc) -- Removal



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.


2. REMOVE COMBINATION METER ASSEMBLY

  1. Remove the combination meter (Toyota Fortuner RM000000THS007X.html).



3. DISCONNECT BRAKE MASTER CYLINDER PUSH ROD CLEVIS

  1. Disconnect the stop light switch connector.



    Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Brake.Brake Pedal (W/O Vsc).Brake Pedal (W/O Vsc) Removal

  1. Remove the return spring.

  1. Remove the clip and clevis pin.

  1. Disconnect the push rod clevis from the brake pedal.



4. REMOVE BRAKE PEDAL SUPPORT SUB-ASSEMBLY


Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Brake.Brake Pedal (W/O Vsc).Brake Pedal (W/O Vsc) Removal

  1. Remove the bolt from the support.



    Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50

  1. Remove the 4 nuts and support.