Deceleration Sensor (W/ Abs) Installation

Connect the sensor connector.

NOTICE:

Securely connect the connector.

Set the deceleration sensor to the crossmember.

NOTICE:

1. Do not use any parts which have been dropped or struck.
   
2. Make sure that there is no foreign matter or carpet between the bracket of the sensor and crossmember.
   
3. Do not do anything to deform the bracket of the sensor, such as kicking or stepping on it.
   

Install the sensor bracket with the 2 bolts.

Torque:

14 N*m{138 kgf*cm, 10 ft.*lbf}

Insert the floor carpet cover into the sensor bracket.

Insert the positioning boss of the floor carpet cover into the hole in the bracket of the sensor.

Attach the 4 claws to install the floor carpet cover.

Install the front seat assembly RH (Toyota Fortuner RM000000Z8T004X.html).