Front Speed Sensor (For 4Wd And Pre-Runner) Installation

Install the skid control sensor clamp with the bolt.

Torque:

14 N*m{138 kgf*cm, 10 ft.*lbf}

NOTICE:

Install the clamp so that the rotation stopper touches the knuckle.

Install the skid control sensor clamp with the bolt.

Torque:

14 N*m{138 kgf*cm, 10 ft.*lbf}

NOTICE:

Install the clamp so that the rotation stopper touches the knuckle.

Install the speed sensor with the bolt.

Torque:

8.5 N*m{87 kgf*cm, 75 in.*lbf}

NOTICE:

1. Make sure there are no pieces of iron or other foreign matter attached to the sensor tip.
   
2. While inserting the speed sensor into the knuckle hole, do not strike or damage the sensor tip.
   
3. After installing the speed sensor, make sure there is no clearance or foreign matter between the sensor stay part and the knuckle.
   
4. When installing the sensor, do not twist the wire harness.
   

Install the harness clamp with the bolt.

Torque:

32 N*m{326 kgf*cm, 24 ft.*lbf}

NOTICE:

1. When installing the clamp, do not twist the wire harness.
   
2. Make sure the clamp rotation stopper touches the installation position.
   

Attach the 2 clamps.

Attach the clamp.

Install the 2 harness clamps with the 2 bolts.

Torque:

32 N*m{326 kgf*cm, 24 ft.*lbf}

NOTICE:

1. When installing the clamps, do not twist the wire harness.
   
2. Make sure the clamp rotation stopper touches the installation position.
   

Attach the 2 clamps.

NOTICE:

When attaching the clamps, do not twist the wire harness.

Connect the connector.

NOTICE:

1. Do not attach the connector to the radiator fan shroud before connecting the connector.
   
2. Securely connect the connector.
   

Attach the 2 clamps and connector.

NOTICE:

When attaching the clamps, do not twist the wire harness.

w/ ABS:
Check the speed sensor signal (Toyota Fortuner RM00000102M00BX.html).

w/ VSC:
Check the speed sensor signal (Toyota Fortuner RM000000XHT070X.html).