Clutch Accumulator (For 1Gr-Fe) Installation


  1. INSTALL CLUTCH ACCUMULATOR ASSEMBLY

  2. BLEED AIR FROM CLUTCH PIPE LINE

  3. CHECK FOR CLUTCH FLUID LEAKAGE

  4. CHECK FLUID LEVEL IN RESERVOIR

Clutch Accumulator (For 1Gr-Fe) -- Installation



1. INSTALL CLUTCH ACCUMULATOR ASSEMBLY


Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50

  1. Install the clutch accumulator with the 3 bolts.

    Torque:
    12 N*m{120 kgf*cm, 9 ft.*lbf}


    Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50

  1. Using SST, connect the 2 flexible tubes.

    SST
    09023-00101
    Torque:
    15 N*m{153 kgf*cm, 11 ft.*lbf}for use without SST
    14 N*m{143 kgf*cm, 10 ft.*lbf}for use with SST
    HINT:
    Use a torque wrench with a fulcrum length of 30 cm (11.81 in.).


2. BLEED AIR FROM CLUTCH PIPE LINE

  1. Fill the master cylinder reservoir with fluid.

    Torque:
    11 N*m{112 kgf*cm, 8 ft.*lbf}

  1. Bleed air from the clutch system.



3. CHECK FOR CLUTCH FLUID LEAKAGE

  1. Check for clutch fluid leakage (Toyota Fortuner RM000001FSF001X.html).



4. CHECK FLUID LEVEL IN RESERVOIR

  1. Check the fluid level in the reservoir (Toyota Fortuner RM000001FSF001X_02_0004.html).