Clutch Pedal Removal


  1. REMOVE INSTRUMENT CLUSTER FINISH PANEL NO.1

  2. REMOVE COMBINATION METER ASSEMBLY

  3. REMOVE PUSH ROD CLEVIS PIN

  4. REMOVE CLUTCH PEDAL ASSEMBLY

Clutch Pedal -- Removal



1. REMOVE INSTRUMENT CLUSTER FINISH PANEL NO.1


Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Clutch.Clutch Pedal.Clutch Pedal Removal
HINT:
To prevent the clips from falling, horizontally pull out the panel. Hold both sides of the panel in the locations indicated by the arrows in the illustration.

  1. Remove the screw <C>.

  1. Detach the 6 claws and 4 clips.

    NOTICE:
    Make sure the center registers are not removed.

  1. Disconnect all connectors and remove the panel.



2. REMOVE COMBINATION METER ASSEMBLY


Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50
NOTICE:
There are 2 types of combination meters. One type has a 40 pin connector and 16 pin connector. The other type only has a 40 pin connector.

  1. Remove the 3 screws.

  1. Disconnect all connectors and remove the combination meter.



3. REMOVE PUSH ROD CLEVIS PIN


Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50

  1. Remove the clip and pin.



4. REMOVE CLUTCH PEDAL ASSEMBLY


Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Clutch.Clutch Pedal.Clutch Pedal Removal

  1. Remove the bolt, 2 nuts and clutch pedal.