Second Brake -- Inspection |
| 1. INSPECT 2ND BRAKE PISTON |
 |
Make sure the 2nd brake piston moves smoothly when applying and releasing low-pressure compressed air to the 2nd brake drum.
| 2. INSPECT 2ND BRAKE CLUTCH DISC |
 |
Replace all discs if one of the following problems is present: 1) a disc, plate or flange is worn or burnt, 2) the lining of a disc is peeled off or discolored, or 3) grooves or printed numbers have even a little bit of damage.
- NOTICE:
- Before assembling new discs, soak them in ATF for at least 15 minutes.
| 3. INSPECT 2ND BRAKE PISTON RETURN SPRING |
 |
Using a vernier caliper, measure the free length of the spring together with the spring seat.
- Standard free length:
- 16.05 mm (0.6319 in.)