Generator -- Installation |
| 1. INSTALL GENERATOR ASSEMBLY |
 |
Install the generator and with the 2 bolts.
- Torque:
- 62 N*m{632 kgf*cm, 46 ft.*lbf}for bolt A
- 25 N*m{255 kgf*cm, 18 ft.*lbf}for bolt B
Install the generator wire with the nut.
- Torque:
- 9.8 N*m{100 kgf*cm, 87 in.*lbf}
Connect the generator connector.
| 2. INSTALL FAN AND GENERATOR V BELT |
Rotate the tensioner pulley clockwise, and then install the V belt.
- NOTICE:
- Make sure that the V belt is set properly on each pulley.
Make sure that the indicator mark of the tensioner is within range A as shown in the illustration.
 |
| 3. INSTALL AIR CLEANER ASSEMBLY |
Connect the air cleaner hose.
Install the cleaner with the 2 bolts.
- Torque:
- 14 N*m{143 kgf*cm, 10 ft.*lbf}
Tighten the hose clamp.
Connect the connector to the mass air flow meter connector.
| 4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Toyota Fortuner RM000004W63000X.html).