Vacuum Regulating Valve Inspection


  1. INSPECT ELECTRIC VACUUM REGULATING VALVE ASSEMBLY (for EGR)

Vacuum Regulating Valve -- Inspection


NOTICE:
Do not remove the electric vacuum regulating valve from the bracket.


1. INSPECT ELECTRIC VACUUM REGULATING VALVE ASSEMBLY (for EGR)

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    1 - 2
    		20°C (68°F)
    		11 to 13 Ω
    1 - Body ground
    2 - Body ground
    		20°C (68°F)
    		10 MΩ or higher
    If the result is not as specified, replace the electric EGR control valve assembly.


    Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.2Kd-Ftv Emission Control.Vacuum Regulating Valve.Vacuum Regulating Valve Inspection

  1. Check the operation of the E-VRV.

    1. When a vacuum of 67 kPa (500 mmHg, 19.7 in.Hg) is applied to port F, check that air flows from port E to the filter.

      Text in Illustration
      *1
      		Port E
      *2
      		Port F
      *3
      		Filter
      *a
      		Air
      *b
      		Vacuum


      2. Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.2Kd-Ftv Emission Control.Vacuum Regulating Valve.Vacuum Regulating Valve Inspection

    2. Apply battery voltage across terminals 1 and 2.

      Text in Illustration
      *1
      		Port E
      *2
      		Port F
      *a
      		Air

    3. Check that air flows from port E to port F.
      If the result is not as specified, replace the electric EGR control valve assembly.