Fuel Injection Nozzle -- Reassembly |
| 1. INSTALL NOZZLE RETAINING NUT |
Install the pressure pin, distance piece and nozzle assembly to the nozzle retaining nut.
 |
Install the washer to the nozzle holder, and temporarily tighten the nozzle holder to the nozzle retaining nut.
Using SST, tighten the nozzle retaining nut.
- SST
- 09268-64010(09268-64020,09268-64030)
- Torque:
- 47 N*m{475 kgf*cm, 34 ft.*lbf}
- NOTICE:
- Over-torquing could cause nozzle deformation and needle adhesion or other defects.
Inspect the holder and nozzle set.
| 2. INSTALL RING PACKING SETTING NUT |
Install a new washer and ring packing setting nut.