Cylinder Head Disassembly
REMOVE VALVE LIFTER
REMOVE INTAKE VALVE
REMOVE EXHAUST VALVE
REMOVE VALVE STEM OIL SEAL
REMOVE SEMICIRCULAR PLUG
REMOVE STRAIGHT SCREW PLUG
REMOVE RING PIN
REMOVE STUD BOLT
REMOVE TIGHT PLUG
Cylinder Head -- Disassembly |
- HINT:
- Thoroughly clean all parts to be assembled.
- Before installing the parts, apply fresh engine oil to all sliding and rotating surfaces.
- Replace all gaskets and oil seals with new ones.
Remove the valve lifters.
- HINT:
- Arrange the valve lifters in the correct order.
Using SST, compress the compression spring and remove the 2 valve spring retainer locks.
- SST
- 09202-70020(09202-00020)
Remove the spring retainer, compression spring, valve and spring seat.
- HINT:
- Arrange the valves, compression springs, spring seats and spring retainers in the correct order.
Using SST, compress the compression spring and remove the 2 valve spring retainer locks.
- SST
- 09202-70020(09202-00020)
Remove the spring retainer, compression spring, valve and spring seat.
- HINT:
- Arrange the valves, compression springs, spring seats and spring retainers in the correct order.
| 4. REMOVE VALVE STEM OIL SEAL |
Using needle-nose pliers, remove the oil seal.
| 5. REMOVE SEMICIRCULAR PLUG |
| 6. REMOVE STRAIGHT SCREW PLUG |
