Venturi Installation

Place a new gasket and the venturi on the intake manifold.

Connect the throttle control motor connector.

Connect the throttle open switch connector.

Install a new gasket and the intake flange with the 3 nuts.

Torque:

12 N*m{122 kgf*cm, 9 ft.*lbf}

Connect the ventilation hose with the clamp.

Connect the manifold absolute pressure sensor connector.

Install the clamp of the heater hose with the bolt.

Torque:

5.0 N*m{51 kgf*cm, 44 in.*lbf}

Connect the intake pipe to the intake flange with the clamp.

Fix the intake pipe in place with the 2 bolts and clamp.

Torque:

18 N*m{184 kgf*cm, 13 ft.*lbf}for bolt

6.0 N*m{61 kgf*cm, 53 in.*lbf}for clamp

Connect the air cleaner hose to the air cleaner and intake pipe with the 2 clamps.

Fix the intake pipe in place with the 2 clamps.

Torque:

5.0 N*m{51 kgf*cm, 44 in.*lbf}

Connect the intake air temperature sensor connector.

Attach the clamp of the intake air temperature sensor harness.