Ecm -- Removal |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
| 2. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY |
 |
Open the glove compartment door.
While pushing in the sides of the glove compartment door as indicated by the arrows in the illustration, open the door to release it from the 2 stoppers.
Open the door until it is horizontal.
Pull the glove compartment door toward the rear of the vehicle to detach the 2 hinges and remove the glove compartment door.
 |
| 3. REMOVE TURBO MOTOR DRIVER |
Disconnect the connector.
 |
Remove the bolt and turbo motor driver.
| 4. REMOVE TCM (for Automatic Transmission) |
Disconnect the 3 connectors.
Remove the 2 bolts and TCM.
 |
| 5. REMOVE ECM |
Disconnect the 4 connectors.
 |
Remove the bolt, 2 nuts and ECM.
| 6. REMOVE NO. 1 ECM BRACKET |
for LHD:
Remove the 3 screws and bracket.
 |
for RHD:
Remove the 3 screws and bracket.
 |
| 7. REMOVE NO. 2 ECM BRACKET |
for LHD:
Remove the 2 screws and bracket.
 |
for RHD:
Remove the 2 screws and bracket.
 |