Front Door Outside Moulding - Removal

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - EXTERIOR PANELS / TRIM

FRONT DOOR OUTSIDE MOULDING - REMOVAL

  • HINT:
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
1. REMOVE FRONT DOOR OUTSIDE MOULDING SUB-ASSEMBLY LH
Front Door Outside Moulding - Removal. EXTERIOR PANELS / TRIM. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Put protective tape around the front door outside moulding sub-assembly LH.

Text in Illustration
*1Protective Tape
Front Door Outside Moulding - Removal. EXTERIOR PANELS / TRIM. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Using a moulding remover, detach the 3 clamps and 11 clips, and remove the front door outside moulding sub-assembly LH.

Remove any clips remaining on the door panel.

  • NOTICE:
  • Be careful not to allow any clips or pieces of clips to fall inside the door panel.