Rear Bumper (W/ Pintle Hook) - Disassembly

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - EXTERIOR PANELS / TRIM

REAR BUMPER (w/ Pintle Hook) - DISASSEMBLY

1. REMOVE NO. 2 FRAME WIRE

w/ TOYOTA Parking Assist-sensor System, w/o Rear Fog Light:

Disconnect the 4 connectors.

Detach the 12 clamps and remove the No. 2 frame wire.

Rear Bumper (W/ Pintle Hook) - Disassembly. EXTERIOR PANELS / TRIM. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

w/ TOYOTA Parking Assist-sensor System, w/ Rear Fog Light:

Disconnect the 6 connectors.

Detach the 14 clamps and remove the No. 2 frame wire.

Rear Bumper (W/ Pintle Hook) - Disassembly. EXTERIOR PANELS / TRIM. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

w/o TOYOTA Parking Assist-sensor System, w/ Rear Fog Light:

Disconnect the 2 connectors.

Detach the 13 clamps and remove the No. 2 frame wire.

Rear Bumper (W/ Pintle Hook) - Disassembly. EXTERIOR PANELS / TRIM. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

2. REMOVE NO. 1 ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)
Rear Bumper (W/ Pintle Hook) - Disassembly. EXTERIOR PANELS / TRIM. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Detach the 2 claws and remove the No. 1 ultrasonic sensor.

  • HINT:
Use the same procedure for all No. 1 ultrasonic sensors.
The illustration shows the No. 1 ultrasonic sensor for the RH corner and back sensor LH and RH. The installation position of the No. 1 ultrasonic sensor for the LH corner is on the opposite side.
3. REMOVE NO. 1 ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)
Rear Bumper (W/ Pintle Hook) - Disassembly. EXTERIOR PANELS / TRIM. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Detach the 2 claws and remove the No. 1 ultrasonic sensor retainer from the rear bumper cover.

  • HINT:
Use the same procedure to remove the No. 1 ultrasonic sensor retainer on the other side.
The illustration shows the No. 1 ultrasonic sensor retainer for the RH corner. The vertical orientation of the No. 1 ultrasonic sensor retainers for the LH corner is opposite that of the image shown in the illustration.
4. REMOVE NO. 2 ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)
Rear Bumper (W/ Pintle Hook) - Disassembly. EXTERIOR PANELS / TRIM. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Detach the 2 claws and remove the No. 2 ultrasonic sensor retainer from the rear bumper cover.

  • HINT:
  • Use the same procedure to remove the No. 2 ultrasonic sensor retainer on the other side.
5. REMOVE REAR BUMPER ENERGY ABSORBER
Rear Bumper (W/ Pintle Hook) - Disassembly. EXTERIOR PANELS / TRIM. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Detach the 8 claws and remove the rear bumper energy absorber.

6. REMOVE REFLEX REFLECTOR ASSEMBLY LH (w/o Rear Fog Light)
Rear Bumper (W/ Pintle Hook) - Disassembly. EXTERIOR PANELS / TRIM. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Remove the 2 nuts.

Detach the claw and remove the reflex reflector assembly LH.

7. REMOVE REFLEX REFLECTOR ASSEMBLY RH (w/o Rear Fog Light)
  • HINT:
  • Use the same procedure described for the LH side.
8. REMOVE REAR FOG LIGHT ASSEMBLY LH (w/ Rear Fog Light)
Rear Bumper (W/ Pintle Hook) - Disassembly. EXTERIOR PANELS / TRIM. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Remove the 2 nuts.

Disconnect the connectors.

Detach the claw and remove the fog light.

9. REMOVE REAR FOG LIGHT ASSEMBLY RH (w/ Rear Fog Light)
  • HINT:
  • Use the same procedure described for the LH side.
10. REMOVE REAR NO. 2 STEP COVER
Rear Bumper (W/ Pintle Hook) - Disassembly. EXTERIOR PANELS / TRIM. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Detach the 10 claws and remove the rear No. 2 step cover.

11. REMOVE REAR NO. 2 BUMPER SIDE BRACKET (w/ Tire Carrier)
Rear Bumper (W/ Pintle Hook) - Disassembly. EXTERIOR PANELS / TRIM. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Remove the 2 screws.

Text in Illustration
*1Rear No. 2 Bumper Side Bracket
*2Rear No. 3 Bumper Side Bracket

Detach the 3 claws and 2 clips, and remove the rear No. 2 bumper side bracket and rear No. 3 bumper side bracket.