Rear Combination Light Assembly - Removal

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - LIGHTING EXT

REAR COMBINATION LIGHT ASSEMBLY - REMOVAL

  • HINT:
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
1. REMOVE REAR COMBINATION LIGHT ASSEMBLY LH
Rear Combination Light Assembly - Removal. LIGHTING EXT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Using a screwdriver wrapped with protective tape, detach the 6 claws and remove the 2 cover.

Text in Illustration
*1Protective Tape
Rear Combination Light Assembly - Removal. LIGHTING EXT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Put protective tape around the rear combination light assembly LH.

Text in Illustration
*1Protective Tape

Remove the 2 bolts.

Detach the 2 clips and remove the rear combination light assembly LH.

Disconnect the connector.

2. REMOVE REAR COMBINATION LIGHT GASKET LH

Remove the rear combination light gasket LH from the rear combination light lens and body LH.

3. REMOVE REAR TURN SIGNAL LIGHT BULB
Rear Combination Light Assembly - Removal. LIGHTING EXT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Detach the clamp.

Turn the socket in the direction indicated by the arrow in the illustration and remove the socket and rear turn signal light bulb.

Remove the rear turn signal light bulb from the socket.