REMOVE OUTER REAR VIEW MIRROR LH

REMOVE OUTER MIRROR LH

REMOVE OUTER MIRROR COVER LH

REMOVE SIDE TURN SIGNAL LIGHT ASSEMBLY LH

Push the upper part of the mirror surface and tilt it.

Using a moulding remover, detach the 4 claws and separate the outer mirror LH from the mirror body.

• HINT:

• Apply protective tape to the outer rear mirror LH to prevent it from being damaged.

w/ EC Mirror:

Disconnect the connector and remove the outer mirror LH.

w/ Mirror Heater:

Disconnect the 2 connectors and remove the outer mirror LH.

Using 2 screwdrivers, detach the 2 claws.

• HINT:

• Tape the screwdriver tip before use.

Insert a screwdriver into the slot as shown in the illustration and push on the outer mirror body to create a space between the outer mirror body and outer mirror cover.

• NOTICE:

• Be careful not to break the ribs.

• HINT:

• Tape the screwdriver tip before use.

Apply protective tape to the areas of the body cover and outer mirror cover as shown in the illustration.

• HINT:

• Tape the moulding remover before use.

Insert a moulding remover into the space made between the outer mirror body and outer mirror cover.

• NOTICE:

• Do not insert the moulding remover more than 4 mm (0.157 in.).

• Standard:

• Area	Specified Condition
  a	4mm

Slide the moulding remover downwards as shown in the illustration to detach the 2 claws.

• NOTICE:

• Standard:

• Area	Specified Condition
  a	40mm
  b	4mm

Remove the moulding remover B.

Apply protective tape to the areas of the body cover and outer mirror cover as shown in the illustration.

Insert a moulding remover B between the outer mirror cover and outer mirror body as shown in the illustration and detach the claw.

Using a screwdriver, detach the claw.

Detach the 2 claws and remove the outer mirror cover.

• NOTICE:

• When removing the cover, be careful not to damage the side turn signal light assembly or cover.

Remove the 3 screws and light.

Disconnect the connector.