Headlight Assembly (For Hid Headlight) - Removal

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - LIGHTING EXT

HEADLIGHT ASSEMBLY (for HID Headlight) - REMOVAL

  • HINT:
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
1. PRECAUTION
  • NOTICE:
  • After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work ().
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
  • NOTICE:
  • When disconnecting the cable, some systems need to be initialized after the cable is reconnected ().
3. REMOVE FRONT BUMPER COVER

()


4. REMOVE FRONT FENDER MAIN SEAL LH
Headlight Assembly (For Hid Headlight) - Removal. LIGHTING EXT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Using a clip remover, detach the 3 clips and remove the fender main seal.

5. REMOVE HEADLIGHT ASSEMBLY LH
Headlight Assembly (For Hid Headlight) - Removal. LIGHTING EXT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Put protective tape around the headlight assembly LH.

Text in Illustration
*1Protective Tape

Remove the 4 bolts.

Disconnect the connectors and headlight assembly LH.