Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - DOOR / HATCH
POWER BACK DOOR TOUCH SENSOR - INSPECTION
| 1. INSPECT POWER BACK DOOR SENSOR ASSEMBLY LH |
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Condition Specified Condition 1(OSL) - 2(OSLE) Not pressed Approximately 1 kΩ Pressed Below 100 Ω
If the result is not as specified, replace the power back door sensor assembly LH.
| *a | Component without harness connected (Power Back Door Sensor Assembly LH) |
| *b | Pressed |
| *c | Not Pressed |
| 2. INSPECT POWER BACK DOOR SENSOR ASSEMBLY RH |
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Condition Specified Condition 1(OSR) - 2(OSRE) Not pressed Approximately 1 kΩ Pressed Below 100 Ω
If the result is not as specified, replace the power back door sensor assembly RH.
| *a | Component without harness connected (Power Back Door Sensor Assembly RH) |
| *b | Pressed |
| *c | Not Pressed |