POWER BACK DOOR MAIN SWITCH - INSTALLATION

Use the same procedure for LHD and RHD vehicles.

The procedure listed below are for LHD vehicles.

1. INSTALL POWER BACK DOOR MAIN SWITCH

Attach the 2 claws to install the power back door main switch.

2. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

Connect the connectors.

for Automatic Air Conditioning System:

Attach the 2 claws to install the room temperature sensor.

Attach the 2 claws to connect the 2 control cables.

w/ Driver Side Knee Airbag:

Attach the 16 claws to install the lower No. 1 instrument panel finish panel.

Install the 2 bolts.

Power Back Door Main Switch - Installation. DOOR / HATCH. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

w/o Driver Side Knee Airbag:

Attach the 9 claws to install the lower No. 1 instrument panel finish panel.

Install the 2 bolts.

Power Back Door Main Switch - Installation. DOOR / HATCH. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the 2 claws to close the hole cover.

3. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Floor Under Cover)

Connect the connectors.

Attach the 3 claws to install the No. 1 instrument panel under cover.

Install the 2 screws.

4. INSTALL COWL SIDE TRIM BOARD LH

Attach the 2 clips to install the cowl side trim board.

Install the cap nut.

5. INSTALL FRONT DOOR SCUFF PLATE LH

Attach the 7 claws and 4 clips to install the scuff plate.