Instrument Panel Safety Pad - Reassembly

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - INTERIOR PANELS / TRIM

INSTRUMENT PANEL SAFETY PAD - REASSEMBLY

  • HINT:
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
A bolt without a torque specification is shown in the standard bolt chart ().
1. INSTALL NO. 2 INSTRUMENT PANEL WIRE (for LHD)

Attach the clamps to install the No. 2 instrument panel wire to the instrument panel.

Instrument Panel Safety Pad - Reassembly. INTERIOR PANELS / TRIM. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

2. INSTALL NO. 2 INSTRUMENT PANEL WIRE (for RHD)

Attach the clamps to install the No. 2 instrument panel wire to the instrument panel.

Instrument Panel Safety Pad - Reassembly. INTERIOR PANELS / TRIM. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

3. INSTALL ANTENNA CORD SUB-ASSEMBLY (w/o Multi-display)

for LHD:


Attach the 7 clamps to install the antenna cord.

Instrument Panel Safety Pad - Reassembly. INTERIOR PANELS / TRIM. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

for RHD:


Attach the 5 clamps to install the antenna cord.

Instrument Panel Safety Pad - Reassembly. INTERIOR PANELS / TRIM. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

4. INSTALL ANTENNA CORD SUB-ASSEMBLY (w/ Multi-display)

for LHD:


Attach the 8 clamps to install the antenna cord.

Instrument Panel Safety Pad - Reassembly. INTERIOR PANELS / TRIM. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

for RHD:


Attach the 6 clamps to install the antenna cord.

Instrument Panel Safety Pad - Reassembly. INTERIOR PANELS / TRIM. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

5. INSTALL NAVIGATION ANTENNA ASSEMBLY (w/ Multi-display)

for LHD:

Install the navigation antenna assembly with the 2 screws.

Attach the 2 clamps.

for RHD:

Install the navigation antenna assembly with the 2 screws.

Attach the 2 clamps.

6. INSTALL NO. 2 SIDE DEFROSTER NOZZLE
Instrument Panel Safety Pad - Reassembly. INTERIOR PANELS / TRIM. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the 3 claws to install the No. 2 side defroster nozzle.

7. INSTALL NO. 1 SIDE DEFROSTER NOZZLE
Instrument Panel Safety Pad - Reassembly. INTERIOR PANELS / TRIM. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the 2 claws to install the No. 1 side defroster nozzle.

8. INSTALL DEFROSTER NOZZLE ASSEMBLY
Instrument Panel Safety Pad - Reassembly. INTERIOR PANELS / TRIM. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the 11 claws to install the defroster nozzle.

9. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY
Instrument Panel Safety Pad - Reassembly. INTERIOR PANELS / TRIM. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the 5 hooks (A).

Attach the 5 hooks (B) to install the front passenger airbag on the instrument panel.

Instrument Panel Safety Pad - Reassembly. INTERIOR PANELS / TRIM. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Install the 2 screws.

Instrument Panel Safety Pad - Reassembly. INTERIOR PANELS / TRIM. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Connect the 2 connectors and install the instrument panel wire assembly to the front passenger airbag.

  • NOTICE:
  • When handling the airbag connector, take care not to damage the airbag wire harness.

Attach the claw and install the wire.

10. INSTALL REAR NO. 1 AIR DUCT (w/ Rear Air Duct)
Instrument Panel Safety Pad - Reassembly. INTERIOR PANELS / TRIM. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Install the rear No. 1 air duct with the 2 screws.

11. INSTALL CENTER HEATER TO REGISTER DUCT
Instrument Panel Safety Pad - Reassembly. INTERIOR PANELS / TRIM. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Install the center heater to register duct with the 3 screws.