CIGARETTE LIGHTER - REMOVAL

Use the same procedures for LHD and RHD vehicles.

The procedures listed below are for LHD vehicles.

1. REMOVE NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION

Put protective tape around the No. 2 instrument panel finish panel cushion.

Text in Illustration
*1	Protective Tape

Using a moulding remover, detach the 7 claws and remove the No. 2 instrument panel finish panel cushion.

2. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH

Remove the clip and screw.

Detach the 8 claws.

Disconnect the connectors, detach the 2 clamps and remove the lower instrument panel pad sub-assembly.

3. REMOVE NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION

Put protective tape around the No. 1 instrument panel finish panel cushion.

Text in Illustration
*1	Protective Tape

Using a moulding remover, detach the 7 claws and remove the No. 1 instrument panel finish panel cushion.

4. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH

Remove the clip and screw.

Detach the 7 claws and remove the lower instrument panel pad sub-assembly.

5. REMOVE LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

Detach the 7 claws.

Disconnect the connectors and remove the lower center instrument cluster finish panel sub-assembly.

6. REMOVE CIGARETTE LIGHTER COVER

Detach the 2 claws and remove the cover.

7. REMOVE CIGARETTE LIGHTER ASSEMBLY

Remove the cigarette lighter knob and element assembly.

Using a screwdriver, detach the claw, and remove the cigarette lighter socket and retainer assembly.

8. REMOVE CIGARETTE LIGHTER BEZEL STAY

Detach the 2 claws and remove the bezel stay.

Cigarette Lighter - Removal