Brake. Lexus Is250, Is220D. Gse20 Ale20
Brake. Lexus Is250, Is220D. Gse20 Ale20
Rear Brake -- Removal |
- HINT:
- Use the same procedures for the RH side and LH side.
- The procedures listed below are for the LH side.
1. REMOVE REAR WHEEL |
2. DRAIN BRAKE FLUID |
- NOTICE:
- If brake fluid leaks onto any painted surface, wash off or remove the brake fluid completely.
3. REMOVE REAR DISC BRAKE PAD WITH ANTI-SQUEAL SHIMS |
Remove the pin hold clip and disengage the engaged parts of anti-squeal spring.
![]() |
Remove the 2 pad guide pins and anti-squeal spring.
Remove the 2 brake pads with the anti-squeal shims.
4. REMOVE ANTI-SQUEAL SHIM |
Remove the 4 anti-squeal shims from each pad.
5. DISCONNECT REAR FLEXIBLE HOSE LH |
Remove the union bolt and gasket from the rear disc brake cylinder assembly, then disconnect the flexible hose.
![]() |
6. REMOVE NO. 1 REAR DISC BRAKE CYLINDER SUPPORT PIN |
Remove the No. 1 cylinder support pin and tilt the disc brake cylinder assembly toward the rear of the vehicle.
![]() |
7. REMOVE REAR DISC BRAKE CYLINDER ASSEMBLY |
Remove the 2 bolts and cylinder assembly rear together with the caliper support bracket.
Remove the 2 No. 1 caliper plates from the caliper support bracket.