Washer Nozzle (For Front Side) Installation

Vehicle Exterior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Wiper Washer. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. INSTALL WASHER NOZZLE SUB-ASSEMBLY (w/ PTC Heater)

  2. INSTALL WASHER NOZZLE SUB-ASSEMBLY (w/o PTC Heater)

  3. INSTALL COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY

  4. INSTALL HOOD TO COWL TOP SEAL

  5. INSTALL FRONT FENDER MAIN SEAL LH

  6. INSTALL FRONT FENDER MAIN SEAL RH

  7. INSTALL UPPER RADIATOR SUPPORT SEAL

  8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

  9. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY LH

  10. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY RH

Washer Nozzle (For Front Side) -- Installation


HINT:
  1. Use the same procedure for the LH and RH sides.
  2. The procedure listed below is for the LH side.


1. INSTALL WASHER NOZZLE SUB-ASSEMBLY (w/ PTC Heater)

  1. Connect the hose.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 4 claws to install the washer nozzle.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Connect the connector and attach the connector clamp.



2. INSTALL WASHER NOZZLE SUB-ASSEMBLY (w/o PTC Heater)


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 3 clamps to install the washer nozzle.

  1. Connect the hose.



3. INSTALL COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 17 claws and 2 clips and install the cowl top ventilator louver sub-assembly.



4. INSTALL HOOD TO COWL TOP SEAL


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 12 clips and 4 clamps to install the hood to cowl top seal.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Install the washer hose.



5. INSTALL FRONT FENDER MAIN SEAL LH


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 3 clips and 2 guides to install the front fender main seal LH.



6. INSTALL FRONT FENDER MAIN SEAL RH
HINT:
Use the same procedure described for the LH side.


7. INSTALL UPPER RADIATOR SUPPORT SEAL

  1. Install the upper radiator support seal with the 7 clips.



8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


9. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY LH


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Wiper Washer.Wiper And Washer System (W/ Rain Sensor).Washer Nozzle (For Front Side) Installation

  1. Stop the wiper motor at the automatic stop position.

    Text in Illustration
    *a
    		Wiper Arm Serrations
    *b
    		Wiper Pivot Serrations

  1. Clean the wiper arm serration with a round file or equivalent.

  1. Clean the wiper pivot serration.



    Land Cruiser. Urj200, 202 Grj200 Vdj200.Wiper Washer.Wiper And Washer System (W/ Rain Sensor).Washer Nozzle (For Front Side) Installation

  1. Install the wiper arm and blade with the nut. Make sure that the wiper arm and blade comes to the position shown in the illustration.

    Text in Illustration
    *a
    		Moulding Edge
    Standard Measurement:
    Position
    		Specified Condition
    A
    		16.8 to 36.8 mm (0.661 to 1.45 in.)
    Torque:
    25 N*m{255 kgf*cm, 18 ft.*lbf}
    HINT:
    Hold down the wiper arm hinge with your hand while tightening the nut.


10. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY RH


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Wiper Washer.Wiper And Washer System (W/ Rain Sensor).Washer Nozzle (For Front Side) Installation

  1. Stop the wiper motor at the automatic stop position.

    Text in Illustration
    *a
    		Wiper Arm Serrations
    *b
    		Wiper Pivot Serrations

  1. Clean the wiper arm serration with a round file or equivalent.

  1. Clean the wiper pivot serration.



    Land Cruiser. Urj200, 202 Grj200 Vdj200.Wiper Washer.Wiper And Washer System (W/ Rain Sensor).Washer Nozzle (For Front Side) Installation

  1. Install the wiper arm and blade with the nut. Make sure that the wiper arm and blade comes to the position shown in the illustration.

    Text in Illustration
    *a
    		Moulding Edge
    Standard Measurement:
    Position
    		Specified Condition
    A
    		20.0 to 40.0 mm (0.787 to 1.57 in.)
    Torque:
    25 N*m{255 kgf*cm, 18 ft.*lbf}
    HINT:
    Hold down the wiper arm hinge with your hand while tightening the nut.

  1. Operate the front wipers while spraying washer fluid on the windshield glass. Make sure that the front wipers function properly and there is no interference with the vehicle body.