Rear Seat Entertainment System Display Signal Circuit Between Radio Receiver And Television Display Assembly

Audio Visual Telematics. Land Cruiser. Urj200, 202 Grj200 Vdj200
Audio Video. Land Cruiser. Urj200, 202 Grj200 Vdj200

DESCRIPTION

WIRING DIAGRAM

INSPECTION PROCEDURE

CHECK HARNESS AND CONNECTOR (MULTI-MEDIA MODULE RECEIVER ASSEMBLY - TELEVISION DISPLAY ASSEMBLY)

REAR SEAT ENTERTAINMENT SYSTEM - Display Signal Circuit between Radio Receiver and Television Display Assembly


DESCRIPTION

This is the display signal circuit from the multi-media module receiver assembly to the television display assembly.

WIRING DIAGRAM


Land Cruiser. Urj200, 202 Grj200 Vdj200.Audio Video.Audio And Visual System (For Radio Receiver Type).Rear Seat Entertainment System Display Signal Circuit Between Radio Receiver And Television Display Assembly


INSPECTION PROCEDURE

1.CHECK HARNESS AND CONNECTOR (MULTI-MEDIA MODULE RECEIVER ASSEMBLY - TELEVISION DISPLAY ASSEMBLY)

  1. Disconnect the F78 multi-media module receiver assembly connector.

  1. Disconnect the L53 television display assembly connector.

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    F78-1 (NTSO) - L53-20 (NTS4)
    		Always
    		Below 1 Ω
    F78-2 (NTSG) - L53-19 (SGN4)
    		Always
    		Below 1 Ω
    F78-3 (SLD2) - L53-18 (SLD4)
    		Always
    		Below 1 Ω
    F78-1 (NTSO) - Body ground
    		Always
    		10 kΩ or higher
    F78-2 (NTSG) - Body ground
    		Always
    		10 kΩ or higher
    F78-3 (SLD2) - Body ground
    		Always
    		10 kΩ or higher


NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)